User Tools

Site Tools


models:kbl_v2_4:classes:default_dimension_specification



Class Default_dimension_specification

Documentation

A Default_dimension_specification defines tolerance values that shall be applied to the harness, if no explicit tolerance value has been defined.

General Information
Owner 5_Topology
Applied Stereotype
Base Classifier
Is Abstractfalse
Derived Classifiers

Attributes

Classifier Name Type Mult. Description
Default_dimension_specification Dimension_value_range Value_range 0..1

Dimension_value_range defines the magnitude of measurements for which the tolerance applies (e.g. length from 500mm - 1500mm).

Default_dimension_specification Tolerance_type String 0..1

The Tolerance_type defines to which measurements this Default_dimension_specification applies (e.g. segment lengths, wire lengths).

Outgoing Relations

Other End This General
Type Role Mult. Mult. Description
Tolerance Tolerance_indication 0..1 1 icon_1227510668.jpg

The Tolerance_indication, which defines the values of the tolerance (e.g. +-5mm).

External_reference External_references 0..* 0..* icon_840801753.jpg

An External_reference which can be used to reference an external document in which the default values are defined (e.g. a company standard).

Incoming Relations

Other End This General
Type Mult. Role Mult. Description
KBL_container 1 Default_dimension_specification 0..* icon_1227510668.jpg
models/kbl_v2_4/classes/default_dimension_specification.txt · Last modified: 2014/11/07 15:25 (external edit)