User Tools

Site Tools


models:kbl_v2_4:classes:general_terminal



Class General_terminal

Documentation

Kontakt A General_terminal is a device designed to terminate a conductor to be affixed usually to a post, stud, chassis, or other conductor or the like in order to establish electrical connection. Note: A General_terminal describes the active part of the connector, which connects electrical, equal to "contact".

General Information
Owner 2_Parts
Applied Stereotype
Base ClassifierPart
Is Abstractfalse
Derived Classifiers

Attributes

Classifier Name Type Mult. Description
Part Part_number String 1

The part_number specifies the identifier of the Part. The format of the part number is user defined (OEM specific).

Part Company_name String 1

The company_name specifies the name of the organizational context in which the Part_number is defined.

Part Alias_id Alias_identification 0..*

The alias_id specifies an additional part_number that is used to identify the Part in another organizational context (e.g. company).

Part Version String 1

The version specifies the version identifier of the Part. A version cumulates and consolidates one or more single changes.

Part Abbreviation String 1

The abbreviation specifies a short name for a Part.

Part Description String 1

The description specifies additional information about the Part.

Part Localized_description Localized_string 0..*

The description specifies additional information about the object. The Localized_description provides the possibility to define descriptions for different language codes.

Part Predecessor_part_number String 0..1

The predecessor_part_number specifies the part number of the predecessor of the Part.

Part Degree_of_maturity String 0..1

The degree_of_maturity specifies the degree of maturity of a Part. Where applicable the following values shall be used: - 'draft' - 'planning' - 'equipment order' - 'disposition'

Part Copyright_note String 0..1

The copyright_note specifies copyright information for a Part.

Part Mass_information Numerical_value 0..1

The mass_information specifies the mass of a Part. Example: Valid values for the unit of the Numerical_value specifying the mass are 'gram', 'kilogram', or also 'kg/piece', 'gram/meter'

General_terminal Terminal_type String 0..1

The terminal_type specifies the type of a General_terminal. Note: There are no values pre-defined. Special values have to be negotiated between exchange partners. Example: 'pin', 'Blade', 'male', 'female', 'grease', 'FL - flat contact', 'KK - box contact', 'SK - ring wire', 'RK - ring lug', 'KS - lug', 'BK - battery clamp', 'OL - open line end of frame', 'SP - splice', 'MK - multiple contact'

General_terminal Plating_material String 0..1

The plating_material specifies the overlaying of a thin coating of metal on components to improve conductivity, provide for easy soldering or prevent rusting or corrosion.

General_terminal Cross_section_area Value_range 0..1

The cross_section_area specifies the electrical cross section, which can be accommodated by the General_terminal.

General_terminal Outside_diameter Value_range 0..1

The outside_diameter specifies the outer width of the isolation, which can be accommodated by the General_terminal.

Incoming Relations

Other End This General
Type Mult. Role Mult. Description
KBL_container 1 General_terminal 0..* icon_1227510668.jpg
Terminal_occurrence 1..* Part 1 icon_840801753.jpg
Special_terminal_occurrence 1..* Part 1 icon_840801753.jpg
models/kbl_v2_4/classes/general_terminal.txt · Last modified: 2014/11/07 15:25 (external edit)