User Tools

Site Tools


models:kbl_v2_4:classes:harness



Class Harness

Documentation

Kabelbaum

All wires in the car need to connect the ECU's, sensors, switches, and actuators. The harness depends on the car configuration.

A Harness is an assembly of insulated conductors formed to a predetermined pattern or configuration.

General Information
Owner 1_Harness
Applied Stereotype
Base ClassifierPart_with_title_block
Is Abstractfalse
Derived Classifiers

Attributes

Classifier Name Type Mult. Description
Part Part_number String 1

The part_number specifies the identifier of the Part. The format of the part number is user defined (OEM specific).

Part Company_name String 1

The company_name specifies the name of the organizational context in which the Part_number is defined.

Part Alias_id Alias_identification 0..*

The alias_id specifies an additional part_number that is used to identify the Part in another organizational context (e.g. company).

Part Version String 1

The version specifies the version identifier of the Part. A version cumulates and consolidates one or more single changes.

Part Abbreviation String 1

The abbreviation specifies a short name for a Part.

Part Description String 1

The description specifies additional information about the Part.

Part Localized_description Localized_string 0..*

The description specifies additional information about the object. The Localized_description provides the possibility to define descriptions for different language codes.

Part Predecessor_part_number String 0..1

The predecessor_part_number specifies the part number of the predecessor of the Part.

Part Degree_of_maturity String 0..1

The degree_of_maturity specifies the degree of maturity of a Part. Where applicable the following values shall be used: - 'draft' - 'planning' - 'equipment order' - 'disposition'

Part Copyright_note String 0..1

The copyright_note specifies copyright information for a Part.

Part Mass_information Numerical_value 0..1

The mass_information specifies the mass of a Part. Example: Valid values for the unit of the Numerical_value specifying the mass are 'gram', 'kilogram', or also 'kg/piece', 'gram/meter'

Part_with_title_block Project_number String 0..1

The project_number specifies the development order number (car or engine project)

Part_with_title_block Car_classification_level_2 String 1

The car_classification_level_2 provides a classification according to "CC8 Recommended Practices Specification and Configuration, Product Structures". Car classification is the identification of a set of similar cars to be offered to the market. Level 2 stands for "Technical information / platform" and reflects the level of a product class in a BoM system which represents a main technical product base (e.g. project, platform, engineering series etc.). In some cases this level carries a complete BoM ("Maximum BoM") for a project, platform, engineering series etc. This level is in some cases called technical documentation.

Part_with_title_block Car_classification_level_3 String 0..1

The car_classification_level_3 provides a classification according to "CC8 Recommended Practices Specification and Configuration, Product Structures". Car classification is the identification of a set of similar cars to be offered to the market. Level 3 stands for "Configuration information / product family" where all variant control mechanism are attached.

Part_with_title_block Car_classification_level_4 String 0..1

The car_classification_level_4 provides a classification according to "CC8 Recommended Practices Specification and Configuration, Product Structures". Car classification is the identification of a set of similar cars to be offered to the market. Level 4 stands for "Furthest pre-configured abstract product class" and represents the furthest configured class of a product, which is not yet a real product. E.g. this could be a complete vehicle, engine, gear-box etc. which has not been evaluated against customer special choices or a abstract vehicle, engine, gear-box etc. which could become a real one after the associated BoM is evaluated. The purpose of this level of a product class instance is in any case to reflect that level of product class of a BoM system which leads to the individual BoM for a single product.

Part_with_title_block Model_year String 1

The model_year specifies the year of the car model.

Harness Content Harness_content 1

The content specifies the information covered by the Harness. The following values shall be used: - 'Harness Complete Set' - 'Harness Subset'

Outgoing Relations

Other End This General
Type Role Mult. Mult. Description
Module Module 0..* 1 icon_1227510668.jpg
Schematic_connection 0..* 1 icon_1227510668.jpg
Module_configuration Module_configuration 0..* 1 icon_1227510668.jpg
Harness_configuration Harness_configuration 0..* 1 icon_1227510668.jpg
Module_family Module_families 0..* 1 icon_1227510668.jpg
Connection_or_occurrence Components 0..* 1 icon_1227510668.jpg

Incoming Relations

Other End This General
Type Mult. Role Mult. Description
KBL_container 1 Harness 0..1 icon_1227510668.jpg
models/kbl_v2_4/classes/harness.txt · Last modified: 2014/11/07 15:25 (external edit)