User Tools

Site Tools


Class CoreSpecification


Defines the properties of a conductor which are specific for cores.

General Information
Owner electrical_parts
Applied Stereotype
Base ClassifierConductorSpecification
Is Abstractfalse
Derived Classifiers


Classifier Name Type Mult. Description
Specification identification String 1

Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. Over all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same.

Specification description AbstractLocalizedString 0..*

Specifies additional, human readable information about the specification.

ConductorSpecification crossSectionArea NumericalValue 0..1

Specifies the cross section area of the conductor (e.g. 0,5 mm²). The cross section area is a nominal value, which refers to the conducting properties of the conductor normalized to the properties of a full material core.

ConductorSpecification massInformation MassInformation 0..1

Specifies the mass information of the conductor. In most cases this mass information is known as copper weight and is normally specified as mass per length (e.g. gram per meter).

ConductorSpecification material Material 0..*

Specifies the material of the conductor.

ConductorSpecification resistance NumericalValue 0..1

Specifies the electrical resistance of the conductor. In most cases this is specified as resistance per length (e.g. Ohm per meter).

ConductorSpecification structure String 0..1

Specifies the structure of the conductor (e.g. symmetrical, asymmetrical).

ConductorSpecification type String 0..1

Specifies the type of the conductor. This should be an enumeration of values defined in a conformance class (e.g. solid, meshwork).

ConductorSpecification numberOfStrands NumericalValue 0..1

Specifies the number of strands in one conductor. If the conductor is solid than the number of strands would be one.

ConductorSpecification platingMaterial Material 0..*

Specifies the plating material of the conductor.

ConductorSpecification strandDiameter NumericalValue 0..1

Specifies the diameter of a single strand in the conductor.

ConductorSpecification voltageRange NumericalValue 0..1

Specifies the voltageRange for which the conductor is approved.

CoreSpecification outsideDiameter NumericalValue 0..1

Specifies the outside diameter of the core.

models/vec_v1_1_2/classes/corespecification.txt · Last modified: 2015/10/20 19:33 (external edit)