User Tools

Site Tools


tutorials:vec:multi_fuses

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tutorials:vec:multi_fuses [2019/03/07 16:40] (current)
4soft.becker created
Line 1: Line 1:
 +{{indexmenu_n>​4200}}
 +~~NOTRANS~~
 +<- component_boxes| Previous ^ start|Table of Content ^ fuses|Next ->
 +====== Multifuses ======
 +<​imgcaption multifuse_illustration| Mutlifuse Example>​{{ ​  ​.:​ee_components:​multi_fuse.png?​300}}</​imgcaption>​
 +A mutlifuse is a special type of fuse that combines multiple fuses in a single component (see <imgref multifuse_illustration>​). In contrast to a regular fuse, where there are only two interchangeable pins, the multi fuse has a single dedicated supplying pin and multiple protected pins. 
 +
 +An individual fuse component is located between each protected pin and the supplying pin. Each fuse component can have its own technical properties (e.g. max current).
 +
 +As shown in <​imgref ​ multifuse_specification>​ a multi fuse is represented in the VEC by a [[:​models:​vec_v1_1_3:​classes:​multifusespecification|MutliFuseSpecification]],​ which is a specialization of the [[:​models:​vec_v1_1_3:​classes:​eecomponentspecification|EEComponentSpecification]]. Therefore all aspects described in the [[start|general section]] potentially apply to multi fuses as well. This sample describes only the aspects that are specific for multi fuses.  ​
 +
 +In the VEC, a multi fuse has __one__ [[:​models:​vec_v1_1_3:​classes:​housingcomponent|HousingComponent]] with a [[:​models:​vec_v1_1_3:​classes:​pincomponent|PinComponent]] for each pin. Each integrated fuse in the multifuse is represented by a [[:​models:​vec_v1_1_3:​classes:​fusecomponent|FuseComponent]]. The fuse component references the pin components that are connected through it and specifies the properties for this (e.g. iMax) through a [[:​models:​vec_v1_1_3:​classes:​fusespecification|FuseSpecification]].
 +
 +The geometrical shape of the multi fuse is defined by a [[:​models:​vec_v1_1_3:​classes:​ConnectorHousingSpecification|ConnectorHousingSpecification]] with [[:​models:​vec_v1_1_3:​classes:​slot|Slots]] and [[:​models:​vec_v1_1_3:​classes:​cavity|Cavities]]. The cavities are referenced by the pin components. ​
 +
 +<​imgcaption multifuse_specification|Specification Multifuse>​{{.:​ee_components:​multifuses_specification.png}}</​imgcaption>​
 +
 +<​Code:​xml linenums|Multifuse Example>
 +<​Specification id="​id_2000_0"​ xsi:​type="​vec:​MultiFuseSpecification">​
 + <​Identification>​MF-3x100</​Identification>​
 + <​DescribedPart>​id_1001_0</​DescribedPart>​
 + <​HousingComponent id="​id_2023_0">​
 + <​Identification>​Hco-MF-3x100</​Identification>​
 + <​HousingSpecification>​id_2000_1</​HousingSpecification>​
 + <​PinComponent id="​id_2024_0">​
 + <​Identification>​V</​Identification>​
 + <​Description id="​id_1003_1"​ xsi:​type="​vec:​LocalizedString">​
 + <​LanguageCode>​De</​LanguageCode>​
 + <​Value>​Versorgung</​Value>​
 + </​Description>​
 + <​ReferencedCavity>​id_2020_3</​ReferencedCavity>​
 + </​PinComponent>​
 + <​PinComponent id="​id_2024_1">​
 + <​Identification>​1A</​Identification>​
 + <​ReferencedCavity>​id_2020_0</​ReferencedCavity>​
 + </​PinComponent>​
 + <​PinComponent id="​id_2024_2">​
 + <​Identification>​2A</​Identification>​
 + <​ReferencedCavity>​id_2020_1</​ReferencedCavity>​
 + </​PinComponent>​
 + <​PinComponent id="​id_2024_3">​
 + <​Identification>​3A</​Identification>​
 + <​ReferencedCavity>​id_2020_2</​ReferencedCavity>​
 + </​PinComponent>​
 + </​HousingComponent>​
 + <​IMaxTotal id="​id_2080_0">​
 + <​UnitComponent>​id_1005_0</​UnitComponent>​
 + <​ValueComponent>​300.0</​ValueComponent>​
 + </​IMaxTotal>​
 + <​FuseComponents id="​id_2046_0">​
 + <​Identification>​F1</​Identification>​
 + <​ConnectedPins>​id_2024_0 id_2024_1</​ConnectedPins>​
 + <​FuseSpecification>​id_2000_3</​FuseSpecification>​
 + </​FuseComponents>​
 + <​FuseComponents id="​id_2046_1">​
 + <​Identification>​F2</​Identification>​
 + <​ConnectedPins>​id_2024_0 id_2024_2</​ConnectedPins>​
 + <​FuseSpecification>​id_2000_3</​FuseSpecification>​
 + </​FuseComponents>​
 + <​FuseComponents id="​id_2046_2">​
 + <​Identification>​F3</​Identification>​
 + <​ConnectedPins>​id_2024_0 id_2024_3</​ConnectedPins>​
 + <​FuseSpecification>​id_2000_3</​FuseSpecification>​
 + </​FuseComponents>​
 +</​Specification>​
 +
 +</​Code>​
 +
 +
 +
 +{{tag>​tutorials:​vec:​v113 part_master instantiation }}
 +
 +~~DISCUSSION~~
  
tutorials/vec/multi_fuses.txt ยท Last modified: 2019/03/07 16:40 by 4soft.becker