User Tools

Site Tools


tutorials:vec:working_with_partial_systems

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tutorials:vec:working_with_partial_systems [2019/05/20 11:22]
4soft.fehlmann
tutorials:vec:working_with_partial_systems [2019/05/21 12:43] (current)
4soft.fehlmann
Line 9: Line 9:
 Sometimes there is the situation that concrete target components are unknown (or not yet defined) or different (topic specific) parts of a system schematic are developed independently as partial systems (e.g. vehicle infrastructure like power, ground or bus systems). In these cases more than one schematic plan exists like the "​blue"​ and the "​red"​ one, which are shown in the example in <imgref plan>. Sometimes there is the situation that concrete target components are unknown (or not yet defined) or different (topic specific) parts of a system schematic are developed independently as partial systems (e.g. vehicle infrastructure like power, ground or bus systems). In these cases more than one schematic plan exists like the "​blue"​ and the "​red"​ one, which are shown in the example in <imgref plan>.
  
-For theses situations the enumeration //​ComponentNodeType//​ contains the specific value "​OpenLink"​ (<imgref enum>​).\\+For theses situations the enumeration //​ComponentNodeType//​ contains the specific value "​OpenLink"​ (see <imgref enum>​).\\
 In the diagram in <imgref diagram> you can see the corresponding model to the "​blue"​ system schematic from the plan. Each component is represented by a //​ComponentNode//​ with it's slots and pins underneath which are represented by the //​ComponentConnector//​ and the //​ComponentPort//​ class. In addition to that the component M.31 is also shown in the diagram even though it is not existing on the blue plan.\\ In the diagram in <imgref diagram> you can see the corresponding model to the "​blue"​ system schematic from the plan. Each component is represented by a //​ComponentNode//​ with it's slots and pins underneath which are represented by the //​ComponentConnector//​ and the //​ComponentPort//​ class. In addition to that the component M.31 is also shown in the diagram even though it is not existing on the blue plan.\\
  
tutorials/vec/working_with_partial_systems.txt ยท Last modified: 2019/05/21 12:43 by 4soft.fehlmann