OccurrenceOrUsage
An OccurrenceOrUsage is an abstract appearance of a part in the harness. This can either be a concrete part (with a part number or something similar) or the description …
•
3 min read
An OccurrenceOrUsage is an abstract appearance of a part in the harness. This can either be a concrete part (with a part number or something similar) or the description …
Signal Graphs A SignalGraph is a directed graph of elements in the vehicle network that participate in the transmission of a signal / function / power / ground etc. A SignalGraph …
Placement and Dimensions A PlacementSpecification is used to define the Placement of OccurrenceOrUsages in a topology as physical elements that build this topology and to define …
3D-Geometry A HarnessGeometrySpecification3D represents either a 3D-model in the car coordinate system or a 3D-model in the formboard system. Each HarnessGeometrySpecification3D …
2D-Geometry A HarnessDrawingSpecification2D represents a specific harness drawing. The coordinates are defined in the coordinate system of the respective drawing. Each …
Module Lists and -Families In addition to the CompositionSpecification and the PartStructureSpecification, the VEC defines two other concepts to control occurrences, especially …
Assemblies, Modules and Harness (Configurations) The VEC composite part concept has four key classes: the PartStructureSpecification, the PartWithSubComponentsRole, the …
Installation Instructions Basis for the definition of installation instructions is the abstract class Instruction which allows instructions to be specified as …
Instances of Placeable Components The diagram shows the mapping between the part master data of a PlaceableElement (partly displayed on the left side) and the corresponding …