Change Description
Change Description The Change_description can be used to define / highlight the actual content of a Change. Therefore the Change_description can reference a set of …
•
1 min read
Dimensions
Dimensions A Dimension_specification defines a tolerance between two Placed_elements (Origin & Target). Placed_elements can be either a Located_component, a Node or a …
•
1 min read
Topology and routing (2)
Topology and routing (2) Components that have a defined position (e.g. Fixings, Grommets, Channels) are placed on the topology with a Fixing_assignment (in contrast to components …
•
1 min read
Sealed Ring Terminals
Sealed ring terminal with overlapping protection Ring terminals are often installed with a wire protection (e.g. a shrinking tube) that is covering the crimp area (see the figure …
