Connector_occurrence

Note: There is a newer version of this specification see KBL 2.5.sr1

Steckverbinder A Connector_occurrence is the occurrence of a Connector_housing in a module part list.

General Information

AttributeValue
Owner3_Part_structure
Applied Stereotype
Base ClassifierChanged_element
Connection_or_occurrence
Located_component
Mounting_element
Reference_element
Is Abstractfalse
Derived ClassifiersSpecified_connector_occurrence

Attributes

NameTypeMult.DescriptionOwning Classifier
IdString1

The id specifies the identifier of the Connector_occurrence.

Connector_occurrence
Alias_idAlias_identification0..*

The alias_id specifies additional identifiers for the Connector_occurrence.

Connector_occurrence
DescriptionString0..1

The description specifies additional information about the ob ject.

Connector_occurrence
Localized_descriptionLocalized_string0..*

The description specifies additional information about the object. The Localized_description provides the possibility to define descriptions for different language codes.

Connector_occurrence
UsageConnector_usage0..1

The usage specifies the way how a Connector_occurrence is used in a connection. Where applicable the following values shall be used: - ’no end’: end of wire without any connector (“blunt cut”) - ‘ring terminal’: - ‘splice’: - ‘dangler’: terminal without any connector housing.

Connector_occurrence
PlacementTransformation0..1

The placement specifies the transformation information, which is used to locate and orient the occurrence in the car coordinate system. For further information see [CESAK].

Connector_occurrence

Outgoing Relations

TypeRoleMult.Mult.Description
Contact_pointContact_points0..*1
Reference_elementReference_element0..*0..*
Installation_instructionInstallation_information0..*1
Connector_housingPart11..*
Slot_occurrenceSlots0..*1

Incoming Relations

TypeMult.RoleMult.Description
Specified_connector_occurrence0..*Related_occurrence1
Previous