Note: There is a newer version of this specification see KBL 2.5.sr1

Kabelader A core is part of a cable. A cable consists of 1-n cores A Core is a single conductor of a multi-core wire including its isolation.

General Information

Attribute Value
Owner 2_Parts
Applied Stereotype
Base Classifier
Is Abstract false
Derived Classifiers


Name Type Mult. Description Owning Classifier
Id String 1

The id specifies the identifier of the Core.

Cable_designator String 0..1

The cable_designator specifies additional information to refer to a Core.

Wire_type String 0..1

The wire_type specifies the type of a Core. Note: There are no values pre-defined. Special values have to be negotiated between exchange partners. Example: ‘protected wire’, ‘flat band’.

Cross_section_area Numerical_value 1

The cross_section_area specifies the electrical cross section of the Core.

Outside_diameter Numerical_value 0..1

The outside_diameter specifies the outer width of the Core.

Bend_radius Numerical_value 0..1

The bend_radius specifies the bend radius of a core.


Outgoing Relations

Type Role Mult. Mult. Description
Processing_instruction Processing_information 0..* 0..1
Wire_colour Core_colour 1..* 1

Incoming Relations

Type Mult. Role Mult. Description
General_wire 1 Core 0..*
Core_occurrence 1..* Part 1