Default_dimension_specification
Note: There is a newer version of this specification see KBL 2.5.sr1
A Default_dimension_specification defines tolerance values that shall be applied to the harness, if no explicit tolerance value has been defined.
General Information
| Attribute | Value |
|---|---|
| Owner | 5_Topology |
| Applied Stereotype | |
| Base Classifier | |
| Is Abstract | false |
| Derived Classifiers |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|---|---|---|---|
| Dimension_value_range | Value_range | 0..1 | Dimension_value_range defines the magnitude of measurements for which the tolerance applies (e.g. length from 500mm - 1500mm). | Default_dimension_specification |
| Tolerance_type | String | 0..1 | The Tolerance_type defines to which measurements this Default_dimension_specification applies (e.g. segment lengths, wire lengths). | Default_dimension_specification |
Outgoing Relations
| Type | Role | Mult. | Mult. | Description |
|---|---|---|---|---|
| External_reference | External_references | 0..* | 0..* | An External_reference which can be used to reference an external document in which the default values are defined (e.g. a company standard). |
| Tolerance | Tolerance_indication | 0..1 | 1 | The Tolerance_indication, which defines the values of the tolerance (e.g. +-5mm). |
Incoming Relations
| Type | Mult. | Role | Mult. | Description |
|---|---|---|---|---|
| KBL_container | 1 | Default_dimension_specification | 0..* |