Installation_instruction

Published on Mar 20, 2015 KBL Version 2.4.sr1 Last updated on Apr 14, 2025 1 min read

Note: There is a newer version of this specification see KBL 2.5.sr1

An Installation_instruction is the description of the methods that can be used to install a Part.

General Information

AttributeValue
Owner6_Foundation
Applied Stereotype
Base Classifier
Is Abstractfalse
Derived Classifiers

Attributes

NameTypeMult.DescriptionOwning Classifier
Instruction_typeString1Installation_instruction
Instruction_valueString1

The instruction_value specifies the value for the kind of the Installation_instruction defined by instruction_type.

Installation_instruction

Incoming Relations

TypeMult.RoleMult.Description
Cavity_plug_occurrence1Installation_information0..*
Cavity_seal_occurrence1Installation_information0..*
Core_occurrence0..1Installation_information0..*
Special_terminal_occurrence1Installation_information0..*
Component_occurrence1Installation_information0..*
Component_box_occurrence1Installation_information0..*
Co_pack_occurrence1Installation_information0..*
Connection1Installation_information0..*
Terminal_occurrence1Installation_information0..*
Wire_protection_occurrence1Installation_information0..*
Connector_occurrence1Installation_information0..*
General_wire_occurrence1Installation_information0..*
Assembly_part_occurrence1Installation_information0..*
Wiring_group1Installation_information0..*
Fixing_occurrence1Installation_information0..*
Accessory_occurrence1Installation_information0..*
Previous

Last updated on Apr 14, 2025