Segment

Verbindungsabschnitt A Segment is a section of a Connection where no intermediate electrical contacts appear. At the beginning and at the end the same wires go in and out. Cables and wires are divided in segments. Every segment has its conditions like length, temperature range, etc.

General Information

Attribute Value
Owner 5_Topology
Applied Stereotype
Base Classifier Changed_element
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
Id String 1

The id specifies the identifier of the Segment.

Segment
Alias_id Alias_identification 0..*

The alias_id specifies additional identifiers for the Segment. Example: Segement Ids may vary from one CAD system export to another. Therefore the CAD system Id is improper for Id attribute. Id shall have a value which is unique within the harness. Alias_id may be used for the CAD system Id.

Segment
Start_vector Double 0..3

The start_vector specifies the tangent of the center curve at the start position. Note: The value can be derived from the center_curve. To avoid that the receiving system has to calculate the value, it can be explicitly specified.

Segment
End_vector Double 0..3

The end_vector specifies the tangent of the center curve at the end position. Note: The value can be derived from the center_curve. To avoid that the receiving system has to calculate the value, it can be explicitly specified.

Segment
Virtual_length Numerical_value 0..1

The virtual_length specifies the represented length of the neutral phase of the segment in 3d.

Segment
Physical_length Numerical_value 0..1

The physical_length specifies the arc length of the neutral phase of the segment in 3d.

Segment
Form Segment_form 0..1

The form specifies information on the geometric shape of the Segment. The following values shall be used: - ‘circular’ - ‘noncircular’

Segment

Outgoing Relations

Type Role Mult. Mult. Description
Fixing_assignment Fixing_assignment 0..* 1
B_spline_curve Center_curve 0..* 1
Node Start_node 1 0..*
Cross_section_area Cross_section_area_information 0..* 1
Protection_area Protection_area 0..* 1
Node End_node 1 0..*
Processing_instruction Processing_information 0..* 1

Incoming Relations

Type Mult. Role Mult. Description
KBL_container 1 Segment 0..*
Dimension_specification 0..* Segments 0..*

Defines an ordered list of segments along which the dimension specification is defined.

Routing 0..* Segments 0..*
Previous