Document_type

Defines the predefined Document_types of an External_reference. A certain Document_type has normally a typical set of information that is defined within its scope.

General Information

Attribute Value
Owner 6_Foundation
Applied Stereotype OpenEnumeration

Enumeration Literals

Name Description
part master

Documents of this type describe the master data of a part / component (e.g. a connector housing, a terminal, a wire).

network architecture
system schematic
wiring description
harness description

Documents of this type contain the description of a Harness (which is for example the scope of the KBL).

installation description
manufacturing description
requirements description
change description
graphics symbol

Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. a SVG, PNG). The use case for this document type are symbols that are used in 2D harness and form board drawings.

geometry model

Documents of this type represent a geometry model (3D), which is normally an external file (e.g. a JT File or some native file of a 3D modelling tool). Typical use cases are for example the models of components (e.g. connectors) used in a 3D model or the 3D visualization of a Harness.

master data definition

Documents of this type master data definition e.g. list valid UsageNodes or list valid Signals.

harness coupling

External_references of this type define the coupling information of wiring harnesses in a vehicle network.

schematic symbol

Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. a SVG, PNG). The use case for this document type are symbols that are used in schematic diagrams.

network symbol

Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. a SVG, PNG). The use case for this document type are symbols that are used in network / architecture diagrams.

deviation table

Documents that define allowed deviations from specified part numbers.

Previous