General_wire

A General_wire is a physical wire, performing electrical connection. A General_wire can either be used to define a single wire or a multi-core wire.

General Information

AttributeValue
Owner2_Parts
Applied Stereotype
Base ClassifierPart
Is Abstractfalse
Derived Classifiers

Attributes

NameTypeMult.DescriptionOwning Classifier
Part_numberString1

The part_number specifies the identifier of the Part. The format of the part number is user defined (company specific).

Part
Company_nameString1

The company_name specifies the name of the organizational context in which the Part_number is defined.

Part
Alias_idAlias_identification0..*

The alias_id specifies an additional part_number that is used to identify the Part in another organizational context (e.g. company).

Part
VersionString1

The version specifies the version identifier of the Part. A version cumulates and consolidates one or more single changes.

Part
AbbreviationString1

The abbreviation specifies a short name for a Part.

Part
DescriptionString1

The description specifies additional information about the Part.

Part
Localized_descriptionLocalized_string0..*

The description specifies additional information about the object. The Localized_description provides the possibility to define descriptions for different language codes.

Part
Predecessor_part_numberString0..1

The predecessor_part_number specifies the part number of the predecessor of the Part.

Part
Degree_of_maturityString0..1

The degree_of_maturity specifies the degree of maturity of a Part. Where applicable the following values shall be used: - ‘draft’ - ‘planning’ - ’equipment order’ - ‘disposition’

Part
Copyright_noteString0..1

The copyright_note specifies copyright information for a Part.

Part
Mass_informationNumerical_value0..1

The mass_information specifies the mass of a Part. Example: Valid values for the unit of the Numerical_value specifying the mass are ‘gram’, ‘kilogram’, or also ‘kg/piece’, ‘gram/meter’

Part
Part_number_typePart_number_type0..1

Defines the type of a Part_number since part numbers are used in the process to identify different characteristics. See the OpenEnumeration Part_number_type. The default value is ‘real part’ the attribute is not defined.

Part
Cable_designatorString0..1

The cable_designator specifies additional information to refer to a General_wire.

General_wire
Wire_typeString0..1

The wire type shall be a value according to agreed standard specification (DIN 76722 or similar).

General_wire
Bend_radiusNumerical_value0..1

The bend_radius specifies the bend radius of a wire.

General_wire
Cross_section_areaNumerical_value0..1

The cross_section_area specifies the electrical cross section of the General_wire.

General_wire
Outside_diameterNumerical_value0..1

The outside_diameter specifies the outer width of the General_wire.

General_wire

Outgoing Relations

TypeRoleMult.Mult.Description
CoreCore0..*1
Wire_colourCover_colour1..*1

Incoming Relations

TypeMult.RoleMult.Description
KBL_container1General_wire0..*
General_wire_occurrence1..*Part1
Previous