RingTerminalSpecification

Note: There is a newer version of this specification see VEC 2.1.0

Specification for the definition of ring terminals.

General Information

Attribute Value
Owner electrical_parts
Applied Stereotype
Base Classifier TerminalSpecification
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
identification String 1

Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. Over all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same.

Specification
description AbstractLocalizedString 0..*

Specifies additional, human readable information about the specification.

Specification
specialPartType String 0..1

The specialPartType allows the specification of subclassifications for a PartOrUsageRelatedSpecification (e.g. different types of connector housings).

PartOrUsageRelatedSpecification
angle NumericalValue 0..2

Specifies the angle against two planes of the connector housing a terminal can be buckled.

TerminalSpecification
sealingClass SealingClass 0..*

Specifies the sealing class of the terminal.

TerminalSpecification
voltageRange ValueRange 0..1

Specifies the allowed voltage range for the connector housing.

TerminalSpecification
boltDiameter NumericalValue 1

Specifies the diameter of the bolt for which the ring terminal is designed for.

RingTerminalSpecification
thickness NumericalValue 1

Specifies the thickness of the contact surface of the ring terminal.

RingTerminalSpecification
boltType String 1

Specifies the type of the bolt. This should be an enumeration of values defined in a conformance class.

RingTerminalSpecification
outsideDimension NumericalValue 0..1

Specifies the diameter of the circle around the center of the bolt which passes through the farthest outside point of the contact surface of the ring terminal. (see KBLFRM-311)

RingTerminalSpecification
torsionProtection Boolean 0..1

Specifies if the ring terminal is torsion protected or not. (see KBLFRM-311)

RingTerminalSpecification
Previous