CavityMounting
Published on Oct 16, 2015
VEC Version 1.1.2
Last updated on Jan 31, 2023
1 min read
Note: There is a newer version of this specification see VEC 2.1.0
A CavityMounting defines the cavities (CavityReference) where the contacted elements (Terminal) will be mounted.
| Attribute |
Value |
| Owner |
contacting |
| Applied Stereotype |
|
| Base Classifier |
ExtendableElement
|
| Is Abstract |
false |
| Derived Classifiers |
|
Attributes
| Name |
Type |
Mult. |
Description |
Owning Classifier |
Outgoing Relations
| Type |
Role |
Mult. |
Mult. |
Description |
| CavityReference |
equippedCavityRef |
1..* |
0..* |
References the cavities that are used for the cavity mounting. |
| CavityMountingDetail |
cavityMountingDetail |
0..* |
1 |
Specifies the CavityMoutingDetails, if a detailed description of the relationships between Cavities and TerminalReceptions is needed. |
| CavityPlugRole |
replacedPlug |
0..* |
0..* |
References the cavity plugs that are obsolete if the cavity mounting is realized. |
Incoming Relations
| Type |
Mult. |
Role |
Mult. |
Description |
| ContactPoint |
1 |
cavityMounting |
0..* |
Defines the mounting to a cavity of the terminal associated with the ContactPoint. The cardinality is 0..* in order to allow a variant dependant cavity mounting. In such a scenario a cavity mounting is valid in a configuration if all addressed cavities and therefore the associated connector housing is available. |