DefaultDimension
Published on Oct 16, 2015
VEC Version 1.1.2
Last updated on Apr 14, 2025
1 min read
Note: There is a newer version of this specification see VEC 2.1.0
A DefaultDimension defines a tolerance value that shall be applied to a part, if no explicit tolerance value has been defined.
| Attribute | Value |
|---|
| Owner | placement |
| Applied Stereotype | |
| Base Classifier | |
| Is Abstract | false |
| Derived Classifiers | |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|
| dimensionValueRange | ValueRange | 1 | dimensionValueRange defines the magnitude of measurements for which the tolerance applies (e.g. length from 500mm - 1500mm). | DefaultDimension |
| dimensionType | String | 1 | The dimensionType defines to which measurements this DefaultDimension applies (e.g. segment lengths, wire lengths). | DefaultDimension |
Outgoing Relations
| Type | Role | Mult. | Mult. | Description |
|---|
| Tolerance | toleranceIndication | 1 | 0..1 | |
Incoming Relations