CavityMounting
Published on May 11, 2020
VEC Version 1.2.0
Last updated on Apr 14, 2025
1 min read
Note: There is a newer version of this specification see VEC 2.1.0
A CavityMounting defines the cavities (CavityReference) where the contacted elements (Terminal) will be mounted.
Attribute | Value |
---|
Owner | contacting |
Applied Stereotype | |
Base Classifier | ExtendableElement
|
Is Abstract | false |
Derived Classifiers | |
Attributes
Name | Type | Mult. | Description | Owning Classifier |
---|
Outgoing Relations
Type | Role | Mult. | Mult. | Description |
---|
CavityMountingDetail | cavityMountingDetail | 0..* | 1 | Specifies the CavityMoutingDetails, if a detailed description of the relationships between Cavities and TerminalReceptions is needed. |
CavityAccessoryRole | cavityAccessory | 0..* | 0..* | |
CavityPlugRole | replacedPlug | 0..* | 0..* | References the cavity plugs that are obsolete if the cavity mounting is realized. |
CavityReference | equippedCavityRef | 1..* | 0..* | References the cavities that are used for the cavity mounting. |
Incoming Relations
Type | Mult. | Role | Mult. | Description |
---|
ContactPoint | 1 | cavityMounting | 0..* | Defines the mounting to a cavity of the terminal associated with the ContactPoint. The cardinality is 0..* in order to allow a variant dependant cavity mounting. In such a scenario a cavity mounting is valid in a configuration if all addressed cavities and therefore the associated connector housing is available. |