CorrugatedPipeSpecification

Note: There is a newer version of this specification see VEC 2.1.0

Specification for the definition of corrugated pipes.

General Information

Attribute Value
Owner non_electrical_parts
Applied Stereotype
Base Classifier TubeSpecification
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
identification String 1

Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. For all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same.

Specification
description AbstractLocalizedString 0..*

Specifies additional, human readable information about the specification.

Specification
specialPartType String 0..1

The specialPartType allows the specification of subclassifications for a PartOrUsageRelatedSpecification (e.g. different types of connector housings).

PartOrUsageRelatedSpecification
soundDampingClass SoundDampingClass 0..*

Specifies the class of sound damping. According to the VDA this is a value between A & E. KBLFRM-311

WireProtectionSpecification
bendRadius NumericalValue 0..1

Specifies the bend radius of the tube.

TubeSpecification
innerDiameter NumericalValue 0..1

Defines the inner diameter of a tube. In the case of a shrinkable tube, it is the diameter of the tube in the unshrinked state.

TubeSpecification
wallThickness NumericalValue 0..1

Specifies the thickness of the wall of the tube.

TubeSpecification
isSlit Boolean 0..1

Specifies whether the tube is slit or not. The style of the slitting can be defined with the slitStyle. If a slitStyle is defined, it implies that isSlit=true.

TubeSpecification
slitStyle TubeSlitStyle 0..1

Specifies the style of the slitting of the tube. If a slitStyle is defined, it implies that isSlit=true.

This attribute is defined as an OpenEnumeration.

TubeSpecification
nominalSize String 0..1

Defines the nominal size of a tube. The nominal size is a name for the size of the tube that is somehow related to the inner diameter of the tube. However, it is not the inner diameter (e.g. "10.5").

TubeSpecification
secondaryNominalSize String 0..1

Defines the secondary nominal size of a tube. The nominal size is a name for the size of the tube that is somehow related to the inner diameter of the tube. However, it is not the inner diameter (e.g. "10.5").

The secondary nominal size shall only be used for two-parted tubes (see TubeSlitStyle = TwoParts). The secondary nominal size defines the size of the outer (larger) tube of a two-parted tube.

TubeSpecification
shape TubeShape 0..1

Specifies the shape of the cross section of the tube.

This attribute is defined as an OpenEnumeration

TubeSpecification
outerDiameter NumericalValue 0..1

Specifies the outer diameter of the tube. The outer diameter of a tube shall only be used for circular tubes (shape = Circular). For other shapes, height and width shall be used.

TubeSpecification
height NumericalValue 0..1

Specifies the height of the tube. If the height is defined, a width shall be defined, too. The height and width of a tube shall only be used for tubes that are not circular (shape != Circular). For circular shapes, the outside diameter shall be used.

TubeSpecification
width NumericalValue 0..1

Specifies the width of the tube. If the width is defined, a height shall be defined, too. The height and width of a tube shall only be used for tubes that are not circular (shape != Circular). For circular shapes, the outside diameter shall be used.

TubeSpecification
length NumericalValue 0..1

Specifies the length of the tube if it is a predefined value.

TubeSpecification
corrugationHeight NumericalValue 0..1

Specifies the height of a corrugation of the pipe.

CorrugatedPipeSpecification
corrugationWidth NumericalValue 0..1

Specifies the width of a corrugation of the pipe.

CorrugatedPipeSpecification
corrugationGradient NumericalValue 0..1

Specifies the gradient of a corrugation of the pipe.

CorrugatedPipeSpecification
Previous