RingTerminalSpecification

Note: There is a newer version of this specification see VEC 2.1.0

Specification for the definition of ring terminals. These are the counterparts to bolt terminals.

General Information

Attribute Value
Owner electrical_parts
Applied Stereotype
Base Classifier TerminalSpecification
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
identification String 1

Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. For all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same.

Specification
description AbstractLocalizedString 0..*

Specifies additional, human readable information about the specification.

Specification
specialPartType String 0..1

The specialPartType allows the specification of subclassifications for a PartOrUsageRelatedSpecification (e.g. different types of connector housings).

PartOrUsageRelatedSpecification
voltageRange ValueRange 0..1

Specifies the allowed voltage range for the connector housing.

TerminalSpecification
sealingType TerminalSealingType 0..1

Defines the SealingType of the Terminal. This type always refers to the sealing of the terminal itself. However, even a terminal which is not sealable can be used in sealed locations with additional measures (e.g. on the slot).

TerminalSpecification
boltDiameter NumericalValue 0..1

Specifies the diameter of the bolt for which the ring terminal is designed for in a numerical way.

RingTerminalSpecification
boltNominalSize String 0..1

Defines the size (diameter) of the bolt for which the ring terminal is designed for in a nominal way (e.g. "M8").

RingTerminalSpecification
thickness NumericalValue 0..1

Specifies the thickness of the contact surface of the ring terminal.

RingTerminalSpecification
boltType String 0..1

Specifies the type of the bolt.

RingTerminalSpecification
outsideDimension NumericalValue 0..1

Specifies the diameter of the circle around the center of the bolt which passes through the farthest outside point of the contact surface of the ring terminal. (see KBLFRM-311)

RingTerminalSpecification
torsionProtection Boolean 0..1

Specifies if the ring terminal is torsion protected or not. (see KBLFRM-311)

RingTerminalSpecification
Previous