Dimension

Note: There is a newer version of this specification see VEC 2.1.0

A Dimension defines a measurement for the distance between two Locations. An acceptable tolerance can be specified additionally. If the Locations are not located on adjacent topology-elements it is possible to specify a Path for the dimension along which the measurement must be taken.

The value for the Dimension is not specified as NumericalValue (which can define a Tolerance as well). This is because the "valueComponent" of the NumericalValue is mandatory. For Dimensions it shall be optional since there are scenarios where the dimension only specifies a Tolerance for a distance defined by the topology (segment length + placement information).

General Information

Attribute Value
Owner placement
Applied Stereotype
Base Classifier ConfigurableElement
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
identification String 1

Specifies a unique identification of the Dimension. The identification is guaranteed to be unique within the containing PlacementSpecification.

Dimension
valueComponent Double 0..1

Defines the value of the dimension. This value can be null, if it shall be calculated and only a tolerance shall be defined.

Dimension
valueCalculated Boolean 0..1

Defines if the value of the Dimension was calculated (e.g. the sum of segment lengths in the topology) or if it was defined manually.

Dimension

Outgoing Relations

Type Role Mult. Mult. Description
Unit unitComponent 1 0..*
Path path 0..1 0..1 Specifies a path in the topology along which the dimension is defined.
Tolerance tolerance 0..1 0..1
DimensionAnchor referenceAnchor 1 0..*

References the location that is used as reference point for the dimensioning (e.g. the location of a fixing as this relates to a fixpoint of the body in white).

See KBLFRM-329 and KBLFRM-391.

DimensionAnchor dimensionAnchor 1 0..*

References the location that is used as dimension point for the dimensioning (e.g. the entry point of a bundle into a connector housing).

See KBLFRM-329 and KBLFRM-391.

Location definedLocations 0..2 1

Incoming Relations

Type Mult. Role Mult. Description
PlacementSpecification 1 dimension 0..* Specifies the Dimensions defined by the PlacementSpecification.
Previous