Note: There is a newer version of this specification see VEC 2.0.2
A WireMounting defines the mounting of a wire end to terminal. If the contacting is required to be waterproof a cavity seal can be mounted additionally.
References the cavity seal that is used for the wire mounting.
Specifies the WireMoutingDetails, if a detailed description of the relationships between WireEnds and WireReceptions is needed.
References the wire ends that are used for the wire mounting. The minimum cardinality is one, because a wire mounting without wire end makes no sense.
The maximum cardinality is * in order to support multi crimps.
|ContactPoint||1||wireMounting||0..*||Specifies the WireMouting defined by ContactPoint. More than one WireMounting is allowed in order to support variance. In concrete configuration the WireMounting with all referenced elements present is used.|