DocumentType
Defines the predefined DocumentTypes of a PartVersion. A certain DocumentType has normally a typical set of information that is defined within its scope. E.g. a part master document contains Specifications that are used for the description of a defined PartVersion.
The content and the degree of information a DocumentType may vary in the different processes.
General Information
Attribute | Value |
---|---|
Owner | core |
Applied Stereotype |
Enumeration Literals
Name | Description |
---|---|
BaselineDefinition | The DocumentVersion represents the definition of a baseline (see BaselineSpecification). |
PartMaster | Documents of this type describe the master data of a part / component (e.g. a ConnectorHousing, a Terminal, a Wire). |
NetworkArchitecture | |
SystemSchematic | |
SchematicProject | The SchematicProject is a bracket around multiple SystemSchematics which are by itself often versioned documents. |
WiringDescription | |
HarnessDescription | Documents of this type contain the description of a Harness (which is for example the scope of the KBL). |
InstallationDescription | |
ManufacturingDescription | |
RequirementsDescription | A requirements description is some kind of document that contains requirements for a certain part or a group of parts, their design or their properties. A requirements description can be a requirements specification (e.g. REQ-IF) or any other document containing requirements (e.g. a norm). |
ChangeDescription | |
GraphicsSymbol | Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. an SVG, PNG). The use case for this document type are symbols that are used in 2D harness and form board drawings. |
GeometryModel | Documents of this type represent a geometry model (3D) of a component or part, normally as a reference to an external file (e.g. a JT File or some native file of a 3D modelling tool). GeometryModels are original CAD Models and not simplified. Typical use cases are for example the models of components (e.g. connectors) used in a 3D model or the 3D visualization of a Harness. |
GeometryModelSimplified | Documents of this type represent a geometry model (3D) of a component or part, normally as a reference to an external file (e.g. a JT File or some native file of a 3D modelling tool). Simplified means, that those models contain only details necessary for representation in wiring harness and not every detail (e.g. for production of the component itsself). For example a simplified connector model might not contain cavity details. However, a simplified model could contain additional (meta-)information necessary in the harness development process (e.g. segment connection points). |
GeometryModelOccurrence | Documents of this type represent a geometry model (3D) of a component or part, normally as a reference to an external file (e.g. a JT File or some native file of a 3D modelling tool). "Occurrence" means, that the model represents the component in a specific usage situation, meaning in a specific shape and position (e.g. a deformed grommet). |
GeometryTemplate | A GeometryTemplate is a GeometryModelSimplified whose actual appearence can be modified with a set of parameters, e.g. a tube can have a variable length, diameter and deformation. A specific set of parameters is defined in GeometryParameters. |
GeometryParameters | An actual set of parameters for a GeometryTemplate. |
MasterDataDefinition | Documents of this type master data definition e.g. list valid UsageNodes or list valid Signals. |
HarnessCoupling | DocumentVersions of this type define the coupling information of wiring harnesses in a vehicle network. The DocumentVersion contains the necessary CouplingSpecifications and the PartUsages for the coupling devices. |
SchematicSymbol | Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. an SVG, PNG). The use case for this document type are symbols that are used in schematic diagrams. |
NetworkSymbol | Documents of this type represent a graphical symbol (2D), which is normally an external file (e.g. an SVG, PNG). The use case for this document type are symbols that are used in network / architecture diagrams. |
DeviationTable | Documents that define allowed deviations from specified part numbers. |
ComponentDrawing | DocumentVersion of this type represent the drawing of a component (Deutsch: Einzelteilezeichnung). Those DocumentVersion are normally used as external reference to the document containing the graphical representation of the component and do not contain Specifications. DocumentVersion describing a component in terms of the VEC (with Specifications) shall have the DocumentType PartMaster. |
ProcessingInstruction | Documents of this type specify the processing / handling of a part during production (e.g. a crimp specification for terminals). |
MatingInterface | Documents of this type are a specification of the geometrical interface for a connector family. All connectors satisfying this interface are plugging compatible with the corresponding component connector, provided that a matching coding is selected. |