WireMountingDetail

With a WireMountingDetail it is possible to describe a detailed wire mounting.

This is needed if the information which wire end is mounted onto which wire reception is important (e.g. coax contacts).

General Information

Attribute Value
Owner contacting
Applied Stereotype
Base Classifier ExtendableElement
Is Abstract false
Derived Classifiers

Attributes

Name Type Mult. Description Owning Classifier
coreCrimpSize Size 0..1

Defines the required core crimp size (width & height) of this specific wire mounting situation.

WireMountingDetail
insulationCrimpSize Size 0..1

Defines the required insulation crimp size (width & height) of this specific wire mounting situation.

WireMountingDetail
wireTipProtrusion ValueRange 0..1

Defines the valid length range in which the protrusion of the conductor from the conductor crimp must be located.

WireMountingDetail

Outgoing Relations

Other End This End General
Role Type Mult. Agg. Unique Ordered Mult. Description
referencedWireEnd WireEnd 1..* N Y N 0..* References the WireEnds that are mounted to referenced WireReception. A cardinality of more than one is allowed in order support parallel connectors, where multiple wire ends are placed on one side of the connector (one wire reception) and the other wire ends are placed on the other side of the connector (the other wire reception).
contactedWireReception WireReceptionReference 1 N Y N 0..* References the WireReception that is used for the WireMounting.

Incoming Relations

This End Other End General
Role Mult. Agg. Unique Ordered Type Mult. Description
wireMountingDetail 0..* Y Y N WireMounting 1

Specifies the WireMoutingDetails, if a detailed description of the relationships between WireEnds and WireReceptions is needed.

Previous