EdgeMountedFixingSpecification
Specification for fixings that are mounted onto an edge.
General Information
| Attribute | Value |
|---|---|
| Owner | non_electrical_parts |
| Applied Stereotype | |
| Base Classifier | FixingSpecification |
| Is Abstract | false |
| Derived Classifiers |
Attributes
| Name | Type | Mult. | Description | Owning Classifier |
|---|---|---|---|---|
| identification | String | 1 | Specifies a unique identification of the specification. The identification is guaranteed to be unique within the document containing the specification. For all VEC-documents a Specification-instance can be trusted to be identical if the DocumentVersion-instance is the same (see DocumentVersion) and the identification of the Specification is the same. | Specification |
| description | AbstractLocalizedString | 0..* | Specifies additional, human readable information about the specification. | Specification |
| specialPartType | String | 0..1 | The specialPartType allows the specification of subclassifications for a PartOrUsageRelatedSpecification (e.g. different types of connector housings). | PartOrUsageRelatedSpecification |
| offset | NumericalValue | 0..1 | Offset between the origin of a fixing (which is defined by its installed position on the car body), and the placement point on the harness. See Diagram "Fixing Coordinates and Dimensions" for details. | FixingSpecification |
| nominalSize | NumericalValue | 0..1 | FixingSpecification | |
| maximumWidthA | NumericalValue | 0..1 | The maximum width of the fixing, measured from the placement plane (XZ-plane) in the direction of the Y-axis (direction of the harness, passing through the fixing). See Diagram "Fixing Coordinates and Dimensions" for details. | FixingSpecification |
| maximumWidthB | NumericalValue | 0..1 | The maximum width of the fixing, measured from the placement plane (XZ-plane) in the opposite direction of the Y-axis (direction of the harness, passing through the fixing). See Diagram "Fixing Coordinates and Dimensions" for details. | FixingSpecification |
| edgeThickness | ValueRange | 0..1 | Defines a range of valid thicknesses, onto which the fixing can be mounted. | EdgeMountedFixingSpecification |